|
| Conducted EMI Filter Design Based on the Noise Source Impedance in Single-phase Grid-connected Inverter |
| Received:April 18, 2018 Revised:May 14, 2018 |
| View/Add Comment Download reader |
| DOI： |
| Keywords:Single-phase inverter Noise source impedance Common mode interference Differential mode interference EMI Filter |
| Fund Project:Project Supported by Natural Science Foundation of Guangdong – Doctor startup project (2017A030310317) |
| Author | Institution | Email |
| Jiangshiqi |
Shenzhen University |
jiangshiqi2017@email.szu.edu.cn |
| Liu Yitao |
Shenzhen University |
liuyt@szu.edu.cn |
| JinDianheng |
Shenzhen University |
jindianheng2016@email.szu.edu.cn |
| PanXuewei |
School of Mechanical Engineering and Automation Harbin Institute of Technology Shenzhen |
xwpan@hit.edu.cn |
|
| Hits: 642 |
| Download times: |
| Abstract: |
| School of Mechanical Engineering and Automation, Harbin Institute of Technology (Shenzhen), Shenzhen 518000, Guangdong Province, China )
Abstract: Grid-connected inverter is a necessary part in Grid-connected system. With the development of semiconductor material, the switching frequency in the power converter becomes higher than before that would produce du/dt and di/dt. Through coupling with parasitic parameters among the system or between the system and ground, results in conducted common mode and differential mode electromagnetic interference (EMI). EMI filter design based on noise source impedance was analyzed and introduced in this paper. The simulation and experiments results verify the effectiveness of this method. |
| Close |
