• 首页|关于本刊|编委阵容|投稿指南|审稿指南|订阅指南|征稿启事|诚邀专家|学术道德|English
  • E-mail:
  • 密 码: 
  •    
  • 用户名:
  • 密 码: 
  •    
最新录用 更多>>
刘清,秦海鸿,余俊月,李友,文谦.SiC BJT的新型高速低损驱动电路设计[J].电源学报,2019,17(2):178-184
SiC BJT的新型高速低损驱动电路设计
Design of Novel Driver with High-speed and Low-loss for SiC BJT
投稿时间:2017-07-04  修订日期:2019-01-02
DOI:10.13234/j.issn.2095-2805.2019.2.178
中文关键词:  SiC BJT  驱动电路  高速低损耗  阻容基极驱动电路  阻性时序基极驱动电路
英文关键词:SiC BJT  gate driver  high-speed and low-loss  resistance-capacitance(RC) base driver  resistance and time-sequence base driver
基金项目:国家自然科学基金资助项目(51677089);中央高校基本科研业务费专项资金资助项目(NS2015039,NS20160047);江苏省普通高校研究生科研创新计划资助项目(SJLX16_0107)
作者单位E-mail
刘清 南京航空航天大学自动化学院, 南京 210016 1978870938@qq.com 
秦海鸿 南京航空航天大学自动化学院, 南京 210016  
余俊月 南京航空航天大学自动化学院, 南京 210016  
李友 南京航空航天大学自动化学院, 南京 210016  
文谦 南京航空航天大学自动化学院, 南京 210016  
摘要点击次数: 687
全文下载次数: 317
中文摘要:
      SiC BJT新型器件是IGBT器件的有力竞争对手,由于SiC BJT是电流型器件,设计适应于SiC BJT的电流型驱动电路非常重要。针对传统双电源阻容RC(resistance-capacitance)驱动电路的不足,设计了一种双电源阻性时序驱动电路。该驱动电路由开通支路、稳态支路和关断支路3个支路组成,通过延时电路产生不同的驱动信号,分别控制3个驱动支路。该结构可以解决传统RC驱动电路的占空比问题和驱动振荡问题,和传统RC驱动电路相比较,其驱动损耗减小很多。为了验证新驱动电路的优势,对两种驱动电路分别进行LTSPICE仿真,并制作了对应的驱动样板,仿真和实验结果验证了所提出方案的良好驱动性能。
英文摘要:
      The novel SiC BJT is a powerful competitor for IGBT devices. Since the SiC BJT is a current-mode device, the design of a current-mode driver suitable for SiC BJT is very important. To overcome the disadvantages of the traditional dual-source resistance-capacitance(RC) base driver, a dual-source resistance and time-sequence base driver was designed in this paper, which was composed of three branches, i.e., turn-on branch, steady driving branch, and turn-off branch. These branches can be controlled by different driving signals generated by a delay circuit, respectively. The proposed driver can solve problems such as the duty circuit limit and driver oscillations with the traditional RC driver; comparatively, its power loss was also reduced obviously. To validate the advantages of the novel driver, two drivers were simulated by LTSPICE, respectively, and the corresponding prototypes were fabricated. Simulation and experimental results verified the satisfying driving performance of the proposed scheme.
查看全文  查看/发表评论  下载PDF阅读器
关闭